horse02@chinaironhorse.com     0086-576-85198037

Products List

SCR System
PA Tube and Assembly Series
Brake Hose Assembly Series
Automotive Power Steering Hose Series
Hydraulic Hose Series
Silicon (Fluorosilicone) Hose Series
Rubber Hose Series
PTFE Tube Series
Steel Tube and Assembly Series
Passenger Car Engine Line Assembly Series
Special Braided Fuel Tube
High and Medium Pressure Resin Tube Assembly
Air Intake Rubber Hose
Other Series

Contact Info

0086-576-85198037
0086-576-85198038
horse02@chinaironhorse.com
No. 288, Chuangye Avenue, Linhai City, Zhejiang Province, China.
Location: Home > Passenger Car Engine Line Assembly SeriesPassenger Car Engine Line Assembly Series

Name: Fuel Line Hose

Type:

Product Specifications:

Show Details:

Material: FKM/ECO/Aramid or polyester /ECO/FKM
Construction: spiral
Appearance: black, surface of the fabric pattern/mill finish
Operating temperature: -40℃~135℃/150℃
Executive standard: SAE J30R7    GBT 24141.2-2009


Specification:
Nominal Size(mm)
Tolerance I.D(mm)
Tolerance O.D(mm)
Working strength(MPa)
Burst strength(min)
Min. bend radius (mm)
5.5
5.5±0.3
11.5±0.5
0.7
3.0
44
6
6.0±0.3
12.0±0.5
0.7
3.0
48
7.5
7.5±0.3
14.5±0.5
0.7
3.0
60

Property:
No
Item
Condition
Requirement
1
vacuum collapse flat
internal pressure80KPa(absolute pressure)
diameter decrease≤20%
2
cold temperature flexibilityt
-40℃,24h,bending
out layer without cracking and fine lines 1MPa/1min ensure no leaking in the test
3
physical properties of green material
tensile strength of out rubber
min. 10MPa
tensile strength of inner or middle rubber
min. 10MPa
elongation rate of out rubber
min. 250%
elongation rate of inner rubber
min. 250%
4
dry and heat aging resistance
135℃,1000h
inner and outer hose without cracking, carbonization and cracks
5
fuel resistance (inner rubber)
23℃,168h,CM15
volume change rate max. +25% / variation of tensile strength max. -40%
23℃,168h,CM85
6
oxidized fuel resistance (inner rubber)
23℃,168h,CM15
variation of tensile strength max. -40%
23℃,168h,CM85
7
fuel resistance(out rubber)
IRM 903oil,135℃,70h
volume change max. +15%
8
extract test
Total lipid extract max. 0.2g/m2
9
ozone resistance(out rubber)
100pphm,40℃,70h
no racking
10
initial adhesion
each layer
min. 1.4N/mmglue material fracture
11
fuel oil aging adhesive
CM15 ,40℃,1000h ;70℃,24h
min. 1.4N/mmglue material fracture
12
kink test
ball pass through the tube freely
13
permeation test
CM15 ,60℃,664h 40℃,1000h
68.75g/m2/day
Back